Plywood Price in 2026: 18 mm, 12 mm and 6 mm Rates by Grade

Plywood prices in India for 2026 by thickness and grade, what moves the price, and how to estimate sheets for a wardrobe or kitchen.

Sanjeev Khemka
By Sanjeev KhemkaUpdated 9 Nov 2026 · 4 min read
In this article
  1. Plywood price by thickness and grade (2026)
  2. What moves the price
  3. Checks before you pay
  4. Frequently asked questions
  5. The bottom line

In 2026, branded 18–19 mm plywood in India typically costs ₹105–200 per square foot for commercial MR grade and ₹125–250 for BWR, BWP and marine grades, which is roughly ₹3,400–8,000 for an 8 x 4 ft sheet. Thinner sheets cost less per square foot: around ₹60–140 for 12 mm and ₹50–70 for 6 mm. The rest of this guide explains what moves the price, how grades and brands compare, and how to work out what a project will actually need.

Stacks of plywood sheets of different thicknesses at a plywood dealer’s godown

The short version:

  • Price per square foot rises with thickness and grade; brand and city add 20–40% either way.
  • MR plywood is for dry interiors, BWR for kitchens and humid rooms, BWP and marine for anything that gets wet.
  • An 8 x 4 ft sheet is 32 sq ft. Multiply the per-sq-ft rate by 32 for the sheet price.
  • Buying cut panels instead of full sheets saves waste on small jobs.

Plywood price by thickness and grade (2026)

ThicknessTypical useCommercial / MR (₹ per sq ft)BWR / BWP / marine (₹ per sq ft)8 x 4 sheet, MR to BWP (₹)
4 mmBacks, curved work35–5540–701,100–2,200
6 mmDrawer bottoms, cabinet backs45–6050–701,450–2,250
9 mmPartitions, shutters (light)50–8060–1001,600–3,200
12 mmShutters, drawers, panelling60–11070–1401,900–4,500
18–19 mmCarcasses, shelves, beds105–200125–2503,400–8,000
25 mmTable tops, heavy shelving120–220140–2603,850–8,300

These ranges combine brand price lists published in 2026 with city-level dealer prices, and they are for branded, ISI-marked boards. Unbranded commercial plywood can be cheaper; we do not recommend it for anything structural. For today’s rate on a specific list, apply for a quote.

What moves the price

Grade (the glue)

MR (moisture resistant) uses urea formaldehyde glue; BWR and BWP use phenolic glues that survive boiling water. IS 303 covers MR, BWR and BWP; IS 710 covers marine. See MDF vs plywood vs HDHMR for where each belongs.

Core species

Gurjan, a dense hardwood, costs more than poplar or eucalyptus cores, but holds screws better and stays flat. Ask what the core is.

Calibration

Calibrated plywood is sanded to an even thickness across the sheet, which matters for laminated shutters. It costs a little more.

Brand and warranty

National brands carry longer warranties and consistent cores. We stock Century, Greenply, Austin, Saburi, Avenger and Sylvan, plus imported birch plywood.

Altendorf sliding panel saw at the Kathwala workshop
We cut sheets to size on this panel saw, so small jobs pay only for the panels they use.

Estimating a project

Count sheets, not square feet. A typical 7 ft wardrobe of 6 ft width uses about four to five 18 mm sheets for the carcass and shelves, one or two 12 mm sheets for shutters, and one 6 mm sheet for the back. Add 10% for cutting waste.

For kitchens, count the base cabinets in BWP and the wall units in BWR or MR. The sink unit alone justifies the higher grade.

Pricing a plywood list?

Send us the sheet list or drawings. We quote by brand and grade and can cut to size. We respond within 24 hours.

Apply for a quote

Checks before you pay

  1. Read the stamp. ISI mark, IS number, grade, and a CM/L licence number.
  2. Measure thickness at all four corners.
  3. Look at the edge for gaps, overlaps and filler in the core.
  4. Knock across the face for hollow spots.
  5. Check flatness by sighting along the sheet.

More detail in our board comparison. If plywood is not right for the job, compare MDF and HDHMR, WPC boards and solid wood boards; we explain WPC in WPC board: price and uses.

Frequently asked questions

What is the price of 18 mm plywood per sq ft in 2026?

Roughly ₹105–200 per sq ft for branded commercial MR plywood and ₹125–250 for BWR, BWP and marine, depending on brand, core and city.

How much does an 8 x 4 plywood sheet cost?

Multiply the per-sq-ft rate by 32. An 18 mm MR sheet is roughly ₹3,400–6,400; BWP or marine roughly ₹4,000–8,000.

Which plywood is best for a kitchen?

BWP for base cabinets and the sink unit, BWR or MR for wall cabinets.

Is marine plywood waterproof?

It uses boiling-water-proof glue and is made to IS 710 for repeated wetting, but the wood itself can still rot if left wet and unsealed. Seal all edges.

Why is branded plywood more expensive?

Denser cores, consistent glue, calibration and warranties. The difference shows in screw holding and in how flat the shutters stay.

The bottom line

Budget around ₹105–200 per sq ft for 18 mm MR and ₹125–250 for BWP, then adjust for brand and city. Spend on the grade where water and weight are, save where neither is, and check every sheet when it arrives. See our plywood range, laminates and veneers.

Need plywood for a project?

Branded plywood, laminates and veneers, cut to size. We respond within 24 hours.

Apply for a quote

Keep reading in Wood & Materials

Sanjeev Khemka

Sanjeev KhemkaWrites about timber, woodworking and trade for Kathwala, which supplies hardwood timber, plywood and panels and makes solid wood furniture and millwork to order. Questions? Get in touch.

Product Enquiry

Ask for a quote

Apply for a quoteWhatsApp