Best Wood for Outdoor Furniture: Teak, Ipe, Iroko and Thermo-Treated Wood

The best woods for outdoor furniture by EN 350 durability class, how thermally modified timber works, and the design details that make outdoor furniture last.

Sanjeev Khemka
By Sanjeev KhemkaUpdated 9 Nov 2026 · 4 min read
In this article
  1. Durability classes, explained
  2. Design details that matter as much as the wood
  3. Frequently asked questions
  4. The bottom line

The best woods for outdoor furniture are those rated very durable or durable under the European standard EN 350: teak, ipe, iroko and thermally modified timber head the list, with white oak and sapele close behind. Durability alone is not enough, though. Stability, the finish, the joinery and the design (whether water can drain away) decide whether a bench lasts five years or thirty.

Teak outdoor chairs and table on a rooftop terrace, partly weathered to silver

The short version:

Durability classes, explained

EN 350 classMeaningExamples
1Very durableTeak, ipe, many thermo-treated woods
1–2Very durable to durableIroko, merbau
2–3Durable to moderately durableWhite oak, sapele, walnut (3)
4Slightly durableRed oak, Douglas fir
5Not durableAsh, beech, maple, rubberwood

The classes describe how the heartwood resists fungal decay in contact with the ground; furniture off the ground does better than the class suggests, and sapwood of any species is not durable. They come from BS EN 350, and the class for each timber is published by trade bodies such as the American Hardwood Export Council and ATIBT.

Solid wood pergola in a garden

Thermally modified timber

Heating timber to around 190–215°C in a low-oxygen kiln changes its chemistry: it absorbs less water, moves less and resists decay, without chemicals. Thermo-treated ash or pine can reach durability class 1–2, which turns a non-durable timber into a good outdoor one. It is more brittle, so it suits cladding, decking and slatted furniture more than slender chair legs. See our outdoor and thermo-modified timber.

Furnishing a terrace, pool or garden?

We make outdoor furniture and decking in teak, iroko and thermo-treated timber. We respond within 24 hours.

Apply for a quote

Design details that matter as much as the wood

  1. Let water drain. Slats with 5–8 mm gaps, sloped seats, no flat pockets where water sits.
  2. Seal end grain. End grain soaks up water like a straw; seal it and keep it off the ground with feet or glides.
  3. Use the right fixings. Stainless steel (A4 near the sea) or brass; plain steel stains oak and iroko black.
  4. Use waterproof glue and joints that drain. Mortise and tenon with a drain path, not dowels that trap water. See types of wood joints.
  5. Choose the finish. Oil for a natural look renewed each season, or leave teak and iroko to weather to silver grey. Avoid film finishes that crack and peel in sun.

Browse our outdoor furniture: outdoor seating, outdoor dining, sun loungers, planters and pergolas and decking. The woods for outdoors page lists the timbers we stock.

Frequently asked questions

What is the best wood for outdoor furniture?

Teak, for its durability, stability and low maintenance. Ipe, iroko and thermo-treated timber are excellent alternatives.

Is oak good for outdoor furniture?

White oak is durable enough with good design and finishing. Red oak is not; its open pores draw in water.

Should I oil teak outdoor furniture?

Only if you want to keep the golden colour. Left alone, teak weathers to silver grey without losing strength.

Can plywood or MDF be used outdoors?

Not for furniture. Even marine plywood needs full sealing and protection; MDF swells. Use solid durable timber or WPC.

How long does outdoor teak furniture last?

Well made and drained, several decades.

The bottom line

Pick a class 1–2 timber, design so water drains, seal end grain and use stainless fixings. Teak remains the safe choice; iroko and thermo-treated timber offer good value. Compare teak and sheesham, and see our species guide.

Need outdoor furniture or decking?

Made to order in durable timbers, for India and export. We respond within 24 hours.

Apply for a quote

Keep reading in Wood & Materials

Sanjeev Khemka

Sanjeev KhemkaWrites about timber, woodworking and trade for Kathwala, which supplies hardwood timber, plywood and panels and makes solid wood furniture and millwork to order. Questions? Get in touch.

Product Enquiry

Ask for a quote

Apply for a quoteWhatsApp